Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > General Interest Forums > New to the Hobby
Register Blogs FAQ Calendar Mark Forums Read

Notices

Reply
Thread Tools
Old 05/12/2016, 07:01 PM   #51
Tautoga
Registered Member
 
Join Date: Dec 2015
Location: Long Island, NY
Posts: 113
I use a Fluval 406 on my tank that Ive had up since September/October.

I use it for mechanical and chemical filtration. I have the large foam pads that are on the side. It has 4 chambers. The bottom chamber I put foam that is smaller mesh than the first foam pads, above that I have ceramic pieces which I am going to switch out to something else (probably carbon or other media) The top has SeaGel for silica and phosphate removal because I started the tank with dead rock and it was leaching silica.

I dismantle and rinse everything once a month and the SeaGel is replaced every 4 months. Its never filthy but it does the job I wanted it to do which is catch debris.

I had the usual diatom blooms, small Cyano bloom, hair algae bloom etc. They've all pretty much died out now and I have coraline algae starting to colonize the rocks along with feather duster worms and amphipods.

The tank looks great and keeps getting better and better every month.



Last edited by Tautoga; 05/12/2016 at 07:07 PM.
Tautoga is offline   Reply With Quote
Old 12/28/2016, 09:00 PM   #52
Jackie_Long
Registered Member
 
Join Date: Dec 2016
Posts: 1
I am a new member. I have a 1 year reef tank 100 litters. I quite sure the canister filter work great like a reactor. I am using JBL Proline 901 which has seachem Purigen, Rowa Phos,Rowa Carbon.


Jackie_Long is offline   Reply With Quote
Old 01/24/2017, 05:32 PM   #53
BarIzoN
Registered Member
 
BarIzoN's Avatar
 
Join Date: Jul 2016
Location: Denver, CO
Posts: 122
Hi,

I just installed a Fluval G3 on my 55G sumpless system. It's running for two days.

The unit is small (smaller than I expected) and fits easily under the tank's cabinet - which has limited space.

So far, it was easy to assemble, and to start, I washed all the filters and cartridges with RO/DI water, not with tap water as said in instructions.

I'm not worried about the conductivity values nor with any other "feature" of the filter.

I think I needed a sump, but I have no room to add, so I'm giving a shot with this filter.

I noticed the water is way clearer and crystalline - that may be for the carbon filter in place.

I'll wait a week to see how the filter is doing...

I have an Aquamaxx HOB skimmer and the skimate is less dark as before.

With that said, I'll track the nitrates and keep posted here.

- BarIzoN -


BarIzoN is offline   Reply With Quote
Old 09/20/2017, 04:41 PM   #54
silz86
Registered Member
 
Join Date: Sep 2017
Posts: 3
I know this post is old, but it has some good information. Hopefully somebody will see this and chime in on this.

I have a JBJ 10 gallon desktop series tank. I HATE MY mechanical filtration on this sucker. It doesn't even work! I was thinking about scrapping this tank and getting a different one but really liked the dimensions of this tank. So I wanted some input from people with canisters to see if my idea would work.

I currently have a reef glass skimmer and my heater that would be in the tank. I would run a small powerhead for flow and I would also have the return pump from the canister for surface agitation.

I have 10lbs of live rock and 10 pounds of lives sand for biological filtration.

If I get a fluval g3/g6 and empty all the chambers and put the following:

Chemipure , phosban and some of those marine pure spheres.

https://www.bulkreefsupply.com/marin...2-spheres.html

You guys think I will be able to run this and have crystal clear water? I would not use filter floss but maybe for a day before a water change just to help me rid of the other particles. but overall there will be no sponges or floss just because I do NOt want to deal with this so called "nitrate factory"

Any advice or input would greatly be appreciated. Thanks


silz86 is offline   Reply With Quote
Old 10/12/2017, 06:21 PM   #55
whittaker727
Registered Member
 
Join Date: Oct 2017
Posts: 1
I'm glad I found this thread for my first post on this forum. I'm rookie reefer and I too have a canister filter that I'll be using to start out with because that's what I already have and I'm trying to be intelligent about spending my money in this expensive hobby to get started. I have a Marineland C-530 and a 60 gal aquarium tank that is not drilled for a sump or a hang off the back type sump. I'm not afraid of maintenance and hope that diligent cleanings, water changes and being engaged in what's going on in my tank will allow me success until I can save up the coin to venture into a reef specif designed tank. I'm looking forward to what the site has to offer.


whittaker727 is offline   Reply With Quote
Old 10/13/2017, 05:04 PM   #56
OldReefGuy
Registered Member
 
Join Date: Dec 2004
Location: Los Angeles
Posts: 184
IMO, They are great and I have always used them in the past and with my new tank, that was my first purchase also.
Canisters Good....Bad Husbandry Not Good.


OldReefGuy is offline   Reply With Quote
Old 10/15/2017, 07:56 PM   #57
Oiler3535
Registered Member
 
Join Date: Oct 2016
Posts: 57
I’m running a 46 bowfront. 6 month’s old with a pair of Oci, a Royal Gramma, Banggai, and tiny still see through tiger blenny. And while I hadn’t planned to go reef so soon, kept getting corals essentially given to me by local reefers making room for new corals. Big Colt, bunch of ricordea, bunch of mushrooms, gsp, Xenia, frogspawn, and bunch of different zoos. No room for a sump, and yet to find a reasonably priced hob skimmer (just heard of one rated for 75g I might get for 160 CAD so crossed fingers). Using my canister from when ran freshwater. Water running crystal clear (weekly clean light algae on glass bc forced to use tap water). Ammonia and Nitrates negligible. pH 8.2, and phosphates between lowest 2 colours on API kit. Alkalinity 10. Monthly ~20% water changes, and clean my canister at same time. Yet to have a problem. After reading horror stories about nitrate factories I had been cleaning canister weekly, but physical filters were barely dirty so moved back to monthly and still fine. Running ceramic rings, purigen, carbon, and phosguard. Going to remove the rings and add GFO ASAP.


Oiler3535 is offline   Reply With Quote
Reply

Tags
canister, corals, filter, reef, tips

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
thread Thread Starter Forum Replies Last Post
Canister filter not working after cleaning for first time Giannag Lighting, Filtration & Other Equipment 2 11/30/2011 12:11 AM
Running NP Biopellets Inside Large Canister Filter? SoLiD Lighting, Filtration & Other Equipment 3 01/15/2011 08:36 PM
algae problem/canister filter? Runnamuck Reef Discussion 4 10/18/2010 03:28 PM
JBJ Reaction 4-Stage Canister Filter djsimsimon Lighting, Filtration & Other Equipment 2 12/17/2009 08:57 PM
caniste filter for reef aquarium wyang76 New to the Hobby 3 03/24/2007 04:04 AM


All times are GMT -6. The time now is 10:49 PM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2017 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014